? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 042_c4c_axial ? 4/20/2016 1 benefts ? self-healing ? l ow losses ? h igh ripple current ? h igh contact reliability ? su itable for high frequency applications ? p p metallized and pet double-sided metallized foil overview the c4c series is a polypropylene metallized flm and polyester double-metallized foil with polyester tape wrapping flled with resin and tinned copper wires. applications typical applications include snubber, clamping, resonance, coupling/decoupling, pulse and blocking. printed circuit board mount power film capacitors c4c series, axial round, 850 C 3,000 vdc/450 C 750 vac part number system c4 c a m u b 3100 aa 0 j series type fire protection rated voltage (vdc) insulation lead diameter (mm) capacitance code (pf) packaging capacitor length (mm) tolerance c4 = mkp capacitors c = round body, snubber application a = no fre retardant s = fire retardant (on request) m = 850 p = 1,200 w = 2,000 y = 3,000 u = polyester tape & resin protection 0 = uninsulated (on request) b = 0.8 c = 1.0 d = 1.2 digits 2 C 4 indicate the frst three digits of the capacitance value. first digit indicates the number of zeros to be added. aa = bulk (bag) C straight leads see "dimensions table" 0 = 33 1 = 44 3 = 58 j = 5% k = 10% one world. one kemet
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 042_c4c_axial ? 4/20/2016 2 dimensions C millimeters l d front view side view d ll ll d d maximum maximum nominal 5 10 C 14 33 0.8 40 14.5 C 21.5 33 1 40 19 C 23 44 1 40 23.5 C 33.5 44 1.2 40 28.5 C 32 58 1.2 40 qualifcation reference standards vde 0560, iec 61071, en 61071 application class (din 40040) gpe/ls vibration strength din 40040, table 6, class v power and ac film capacitors printed circuit board mount power film capacitors C c4c series, axial round, 850 C 3,000 vdc/450 C 750 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 042_c4c_axial ? 4/20/2016 3 performance characteristics temperature range -40c to +85c maximum permissible ambient temperature +70c iec climatic category 40/85/56 according to iec 68C1 peak non-repetitive maximum current i pkr x 1.5 test voltage terminal to terminal (vtt) 2 v n for 10 seconds test voltage terminal to case (vtc) 3 k vdc 50 hz for 60 seconds insulation resistance test conditions temperature: +25c 5% voltage charge time: 1 minute test voltage: 100 vdc typical value (ris x c): 3,000 seconds dissipation factor (df) 5 x 10 -4 at 1 khz and 20c capacitance deviation in operating temperature range of -40c to +85c 1.5% maximum on capacitance value measured at +20c life expectancy 30,000 hours at v , 100,000 hours at v n failure quota 300/10 9 components per hour change of capacitance vs. operating time -3% after 30,000 hours at v rms or after 100,000 hours at v n protection polyester wrapping with epoxy resin fll standard execution: non-fame on request: fame retardant execution category c leads tinned copper (lead content = 5%) installation any position damp heat test test conditions relative humidity: 93% 2% temperature: +40c test duration: 56 days capacitance change: 5% df change: 50% of nominal value at 1 khz insulation resistance: 50% of limit value power and ac film capacitors printed circuit board mount power film capacitors C c4c series, axial round, 850 C 3,000 vdc/450 C 750 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 042_c4c_axial ? 4/20/2016 4 table 1 C ratings & part number reference cap value (f) vdc vac peak vdc maximum dimensions (mm) ripple current peak current esr (max) dv/dt (v/s) packaging quantity part number d l 100 khz 70c (a) (a) 100 khz (m) 0.1 850 450 1200 10.5 33 5 45 16.6 450 300 c4c(1)m(2)b3100aa0(3) 0.15 850 450 1200 12.5 33 7 68 11.5 450 300 c4c(1)m(2)b3150aa0(3) 0.22 850 450 1200 15.5 33 9 99 8.1 450 200 c4c(1)m(2)c3220aa0(3) 0.33 850 450 1200 18.5 33 9 149 5.8 450 150 c4c(1)m(2)c3330aa0(3) 0.47 850 450 1200 21.5 33 9 212 4.6 450 100 c4c(1)m(2)c3470aa0(3) 0.68 850 450 1200 21 44 9 204 5.1 300 100 c4c(1)m(2)c3680aa1(3) 1 850 450 1200 25 44 12 300 3.8 300 50 c4c(1)m(2)d4100aa1(3) 1.5 850 450 1200 30.5 44 12 450 3.1 300 50 c4c(1)m(2)d4150aa1(3) 2 850 450 1200 28.5 58 12 400 3.8 200 30 c4c(1)m(2)d4200aa3(3) 2.2 850 450 1200 29.5 58 12 440 3.7 200 30 c4c(1)m(2)d4220aa3(3) 2.5 850 450 1200 31.5 58 12 500 3.5 200 30 c4c(1)m(2)d4250aa3(3) 0.047 1200 500 1600 10 33 4 33 27.1 700 400 c4c(1)p(2)b2470aa0(3) 0.068 1200 500 1600 12 33 5 48 19.1 700 300 c4c(1)p(2)b2680aa0(3) 0.1 1200 500 1600 14 33 7 70 13.4 700 250 c4c(1)p(2)b3100aa0(3) 0.15 1200 500 1600 17.5 33 9 105 9.2 700 150 c4c(1)p(2)c3150aa0(3) 0.22 1200 500 1600 20.5 33 9 154 6.8 700 100 c4c(1)p(2)c3220aa0(3) 0.33 1200 500 1600 20 44 9 149 7.2 450 100 c4c(1)p(2)c3330aa1(3) 0.47 1200 500 1600 23 44 9 212 5.6 450 70 c4c(1)p(2)c3470aa1(3) 0.68 1200 500 1600 27.5 44 12 306 4.2 450 50 c4c(1)p(2)d3680aa1(3) 1 1200 500 1600 33 44 12 450 3.5 450 50 c4c(1)p(2)d4100aa1(3) 1.2 1200 500 1600 29 58 12 330 4.5 275 30 c4c(1)p(2)d4120aa3(3) 1.5 1200 500 1600 32 58 12 413 4 275 30 c4c(1)p(2)d4150aa3(3) 0.022 2000 630 2400 10.5 33 3 25 48.2 1150 400 c4c(1)w(2)b2220aa0(3) 0.033 2000 630 2400 12.5 33 4 38 32.5 1150 300 c4c(1)w(2)b2330aa0(3) 0.047 2000 630 2400 15 33 6 54 23 1150 200 c4c(1)w(2)c2470aa0(3) 0.068 2000 630 2400 17.5 33 7 78 16.3 1150 150 c4c(1)w(2)c2680aa0(3) 0.1 2000 630 2400 20.5 33 9 115 11.6 1150 100 c4c(1)w(2)c3100aa0(3) 0.15 2000 630 2400 19.5 44 9 105 11.3 700 100 c4c(1)w(2)c3150aa1(3) 0.22 2000 630 2400 23.5 44 12 154 8 700 70 c4c(1)w(2)d3220aa1(3) 0.33 2000 630 2400 28.5 44 12 231 5.9 700 50 c4c(1)w(2)d3330aa1(3) 0.47 2000 630 2400 33.5 44 12 329 4.8 700 50 c4c(1)w(2)d3470aa1(3) 0.56 2 000 630 2400 29 58 12 224 6.1 400 30 c4c(1)w(2)d3560aa3(3) 0.68 2000 630 2400 32 58 12 272 5.4 400 30 c4c(1)w(2)d3680aa3(3) 0.0068 3000 750 3500 10 33 2 14.5 132 2100 400 c4c(1)y(2)b1680aa0(3) 0.01 3000 750 3500 12 33 3 21 90.3 2100 300 c4c(1)y(2)b2100aa0(3) 0.015 3000 750 3500 14.5 33 4 32 60.5 2100 200 c4c(1)y(2)c2150aa0(3) 0.022 3000 750 3500 17 33 5 46 41.6 2100 150 c4c(1)y(2)c2220aa0(3) 0.033 3000 750 3500 20.5 33 6 69 28.3 2100 100 c4c(1)y(2)c2330aa0(3) 0.047 3000 750 3500 19 44 7 59 25.7 1250 100 c4c(1)y(2)c2470aa1(3) 0.068 3000 750 3500 22.5 44 9 85 18.3 1250 70 c4c(1)y(2)c2680aa1(3) 0.1 3000 750 3500 27 44 12 125 12.8 1250 50 c4c(1)y(2)d3100aa1(3) 0.15 3000 750 3500 32 44 12 188 9.2 1250 50 c4c(1)y(2)d3150aa1(3) 0.22 3000 750 3500 31 58 12 165 9.5 750 30 c4c(1)y(2)d3220aa3(3) capacitance value (f) vdc vac peak vdc d (mm) l (mm) ripple current peak current esr dv/dt (v/s) packaging quantity part number (1) a = no fre retardant; s = fre retardant (on request) (2) u = tape and resin protection; 0 = unprotected (on request) (3) k = 10%, j = 5% power and ac film capacitors printed circuit board mount power film capacitors C c4c series, axial round, 850 C 3,000 vdc/450 C 750 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 042_c4c_axial ? 4/20/2016 5 environmental compliance as an environmentally conscious company, kemet is working continuously with improvements concerning the environmental effects of both our capacitors and the production of them. in europe (rohs directive) and in some other geographical areas like china, legislation has been put in place to prevent the use of some hazardous materials, like lead (pb), in electronic equipment. all products in this catalog are produced to help our customers' obligations to guarantee their products to fulfll these legislative requirements. the only material of concern in our products has been lead (pb), which has been removed from all designs to fulfll the requirement of containing less than 0.1% of lead in any homogeneous material. kemet will closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever needed. some customer segments like medical, military and automotive electronics may still require the use of lead in electrode coatings. to clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for rohs compatible capacitors. because of customer requirements there may appear additional markings like lf = lead free or lfw = lead free wires on the label. materials & environment the selection of materials used by kemet for the production of capacitors is the result of extensive experience and constant attention to environmental protection. kemet selects its suppliers according to iso 9001 standards and carries out statistical analysis on the materials purchased before acceptance. all materials are, to the company's present knowledge, non-toxic and free from cadmium, mercury, chrome and compounds, pcb (polychlorine triphenyl), bromide and chlorine dioxins bromurate clorurate, cfc and hcfc and asbestos. green products all kemet power flm products are rohs compliant. insulation resistance when the capacitor temperature increases, the insulation resistance decreases. this is due to increased electron activity. low insulation resistance can also be the result of moisture trapped in the windings, caused by a prolonged exposure to excessive humidity. dissipation factor dissipation factor is a complex function involved with the ineffciency of the capacitor . the tg may change up and down with increased temperature. for more information, please refer to performance characteristics. power and ac film capacitors printed circuit board mount power film capacitors C c4c series, axial round, 850 C 3,000 vdc/450 C 750 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 042_c4c_axial ? 4/20/2016 6 sealing hermetically sealed capacitors when the temperature increases, the pressure inside the capacitor increases. if the internal pressure is high enough, it can cause a breach in the capacitor which can result in leakage, impregnation, flling fuid or moisture susceptibility . resin encased/wrap & fill capacitors the resin seals on resin encased and wrap and fll capacitors will withstand short-term exposure to high humidity environments without degradation. resins and plastic tapes will form a pseudo-impervious barrier to humidity and chemicals. these case materials are somewhat porous and through osmosis can cause contaminants to enter the capacitor. the second area of contaminated absorption is the lead-wire/resin interface. since resins cannot bond 100% to tinned wires, there can be a path formed up to the lead wire into the capacitor section. aqueous cleaning of circuit boards can aggravate this condition. barometric pressure the altitude at which hermetically sealed capacitors are operated controls the voltage rating of the capacitor. as the barometric pressure decreases, the susceptibility to terminal arc-over increases. non-hermetic capacitors can be affected by internal stresses due to pressure changes. this can be in the form of capacitance changes or dielectric arc-over as well as low insulation resistance. heat transfer can also be affected by altitude operation. heat generated in operation cannot be dissipated properly and can result in high ri2 losses and eventual failure. radiation radiation capabilities of capacitors must be taken into consideration. electrical degradation in the form of dielectric embitterment can take place causing shorts or opens. power and ac film capacitors printed circuit board mount power film capacitors C c4c series, axial round, 850 C 3,000 vdc/450 C 750 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 042_c4c_axial ? 4/20/2016 7 soldering process the implementation of the rohs directive has required the selection snagcu (sac) alloys or sncu alloys as primary solder. this has increased the liquidus temperature from that of 183oc for snpb eutectic alloy to 217oc C 221oc for the new alloys. as a result, the heat stress to components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. polypropylene capacitors are especially sensitive to heat (melting point of polypropylene is 160oc C 170oc). wave soldering can be destructive especially for mechanically small polypropylene capacitors (lead spacings 5 C 10 mm) and great care must be taken during soldering. the solder profles from kemet are highly recommended. you may also refer to the wave soldering curve from iec publication 61760 C 1 edition 2. please consult kemet with any questions. construction margin margin detailed cross section polyester tape wrapping single-sided metallized polypropylene film (first layer) double-sided metallized polyester film (second layer) thermosetting resin end-fill lead metal contact layer lead margin polyester tape wrapping thermosetting resin end-fill metal contact layer margin single-sided metallized polypropylene film film winding scheme options 1 section single-sided metallized polypropylene film single-sided metallized polypropylene film single-sided metallized polypropylene film single-sided metallized polypropylene film 2 sections 3 sections 4 sections single-sided metallized polypropylene film polypropylene film dielectric 1 section double-sided metallized polyester film 3 sections double-sided metallized polyester carrier film polypropylene film dielectric double-sided metallized polyester carrier film 2 sections polypropylene film dielectric double-sided metallized polyester carrier film single-sided metallized polypropylene film 4 sections polypropylene film dielectric double-sided metallized polyester carrier film polypropylene film dielectric 1 section polypropylene film/foil 2 sections metal foil metal foil single-sided metallized polypropylene film polypropylene film dielectric metallized polyphenylene sulfide film with vacuum-evaporated aluminum electrodes 1 section metallized polyphenylene sulfide film (smr) metallized impregnated paper 1 section metallized impregnated paper single-sided metallized polyester film 1 section single-sided metallized polyester film polypropylene film dielectric 1 section axial - polypropylene film/foil 2 sections metal foil single-sided metallized polypropylene film polypropylene film dielectric metal foil single-sided metallized polypropylene film 2 sections polypropylene film dielectric double-sided metallized polyester carrier film single-sided metallized polypropylene film 1 section axial - single-sided metallized polypropylene film single-sided metallized polyester film 1 section axial - single-sided metallized polyester film axial - double-sided metallized polyester film winding scheme power and ac film capacitors printed circuit board mount power film capacitors C c4c series, axial round, 850 C 3,000 vdc/450 C 750 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 042_c4c_axial ? 4/20/2016 8 marking capacitance voltage (vdc) approval mark self healing capacitance tolerance application class series dielectric code voltage (vac) operating temperature range power and ac film capacitors printed circuit board mount power film capacitors C c4c series, axial round, 850 C 3,000 vdc/450 C 750 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 042_c4c_axial ? 4/20/2016 9 kemet corporation world headquarters 2835 kemet way simpsonville, sc 29681 mailing address: p.o. box 5928 greenville, sc 29606 www.kemet.com tel: 864-963-6300 fax: 864-963-6521 corporate off ces fort lauderdale, fl tel: 954-766-2800 north america northeast wilmington, ma tel: 978-658-1663 southeast lake mary, fl tel: 407-855-8886 central novi, mi tel: 248-994-1030 irving, tx tel: 972-915-6041 west milpitas, ca tel: 408-433-9950 mexico guadalajara, jalisco tel: 52-33-3123-2141 europe southern europe sasso marconi, italy tel: 39-051-939111 skopje, macedonia tel: 389-2-55-14-623 central europe landsberg, germany tel: 49-8191-3350800 kamen, germany tel: 49-2307-438110 northern europe wyboston, united kingdom tel: 44-1480-273082 espoo, finland tel: 358-9-5406-5000 asia northeast asia hong kong tel: 852-2305-1168 shenzhen, china tel: 86-755-2518-1306 beijing, china tel: 86-10-5877-1075 shanghai, china tel: 86-21-6447-0707 seoul, south korea tel: 82-2-6294-0550 taipei, taiwan tel: 886-2-27528585 southeast asia singapore tel: 65-6701-8033 penang, malaysia tel: 60-4-6430200 bangalore, india tel: 91-806-53-76817 note: kemet reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. kemet does not assume any responsibility for infringement that might result from the use of kemet capacitors in potential circuit designs. kemet is a registered trademark of kemet electronics corporation. power and ac film capacitors printed circuit board mount power film capacitors C c4c series, axial round, 850 C 3,000 vdc/450 C 750 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 042_c4c_axial ? 4/20/2016 10 prototype sample disclaimer the customer acknowledges the following limitations of the prototype samples: (1) prototype samples are manufactured from preliminary designs and manufacturing processes; may not represent f nal designs; have not been released for commercial use and are not subject to the same quality control procedures applicable to released products. (2) prototype samples are not qualif ed parts and are provided as-is by kemet electronics corporation, which specif cally disclaims any and all warranties and guarantees, explicit or implied, including, without limitation, the warranties of merchantability and f tness for a particular purpose or use. (3) prototype samples are not intended for commercial use; are provided for engineering evaluation only and are not recommended for use in the customers production line. (4) the customer assumes the risk ofany and alluses that the customer makes of the prototype samples. general disclaimer all product specif cations, statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute C and we specif cally disclaim C any warranty concerning suitability for a specif c customer application or use. this information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. kemets product warranty is set forth at www.kemet.com under terms and conditions of sale. power and ac film capacitors printed circuit board mount power film capacitors C c4c series, axial round, 850 C 3,000 vdc/450 C 750 vac
|
